Dynamic website production process and details

The second step is to create a new web page file and test the effect.

The third step is to learn the knowledge of Html, Css, VBcrvp and Asp, write code, and modify other people's webpage special effect code.

The first step is to set up a dynamic website test environment.

A website has both html files and asp files. What's the difference between the two? dynamic Beijing website construction The file type of asp is mainly asp file. The html file can be opened directly in the xp environment to see the effect. The asp file must be configured in the ISS server environment.

3. Click "Next" to start the installation. When you need to insert the system CD to find the i386 file, click Browse to select the previously downloaded and unzipped ISS5.1 file, and then find the corresponding file to install. The Windows pop-up version is incorrect. Ignore it and click Cancel to continue the installation.

Note: The installation time is long. If it takes too long to respond, restart the computer and install it again. If it does not work properly after installation, please uninstall it, restart the computer, and install it again. In short, we will succeed in the end.

Run the browser and enter in the address bar //localhost/localstart.asp Then press the enter key. If a web page can be opened, the installation is successful. After installing Internet Information Services, create a new website folder on your computer, such as "Dynamic Web". Next, configure the folder of the website to Internet Information Services.

4. From Start, open Internet Information Service, expand Local Computer, right-click Default Website, and select Properties.

In the Home Directory item of the Default Site Properties dialog box, click Browse to select the folder of the local dynamic network.

In the Document item of the Default Site Properties dialog box, add the index.asp file. Finally, click OK to complete the configuration.

Appendix: Configure ftp sites in "Internet Information Service".

(1) Open Internet Information Services from Start and expand Local Computer.

(2) Right click Default FTP Site and select the Properties menu item. Set the IP address of the local machine in FTP. I use a router, and the IP address is 192.168.1.15. The public network user can search the IP address on the Internet to find the IP address of this computer. My computer is 119.7.74.156. The default port is 21, which generally does not need to be changed. Set the connection and enable logging (record which IP addresses have accessed).

(3) In the Home Directory item of the Default FTP Site Properties dialog box, click Browse to select the folder where files are uploaded and downloaded with other users on your computer. (Optional setting: If you want others to download files on your computer, you should put those files in this directory. It is recommended not to use a directory on disk C. Then check the "read" and "record access" (general access permissions, if you want others to upload, you can choose "write", which is dangerous, of course), The list of catalog styles is up to you. For "security account", the option of allowing anonymous connection must be filled in. Otherwise, users need a user name and password to access this site. Anonymous access is allowed by default. The user name is anonymous, and the password is empty. In the "Message" option, you can set some welcome messages you like. These are very simple. The maximum number of connections should not be too large. Otherwise, if many people visit your computer at the same time, and the computer configuration is general, you will get stuck. For general learning, setting it to 10 is not much worse.) Click "OK".

(4) Users who use the router fill in the IP address in the LAN, and then need to map port 21 in the router.

(5) Test whether the ftp site can be opened. Enter in the "Run" or address bar ftp://192.168.1.15

(6) If the previous step fails, proceed as follows. First, open the Network Neighborhood Properties - Local Connection Properties - Advanced - Settings - Advanced - Settings in Network Connection Settings - Hook the FTP server - and then press OK; Then open the browser -- Tools -- INTERNET options -- Advanced -- Use passive FTP on the hook and enable folder view for FTP sites; Finally, re enable the local connection (first disable the local connection, then enable the local connection).

The second step is to create a new web page file and test the effect.

The first and simplest method is to write web page code or asp program with notepad file and save it as asp file.

1. We create a new notepad file, write the following sentence in it:<%=now()%>, then we save the file as test.asp, and then put it in the dynamic network of the configured iis website folder.

2. Open "Internet Information Service", find the file in iis, right click to browse in the browser. At this time, we will see results like this: 2009-3-18 13:17:29

The second method is to create a new asp file in dreamweaver cs3, and then press "2." above to test.

The third step is to learn the knowledge of Html, Css, VBcrvp and Asp, write code, and modify other people's webpage special effect code.